fake bell and ross BR-X1 Skeleton Tourbillon Sapphire BRX1-SKTB-SAPHIR watch

bell and ross skull Although stamps are usually stamped on the case of this price segment, the edge of the case is not accurate, but the edge of BR 05 case is neat and clear, and other decorations are beautiful but attractive, which is very suitable for watches. The bridge, base plate and rotor shall have consistent sandblasting treatment. The spokes of the rotor are all chamfered mechanically to keep consistent appearance, and embossed with the brand name on the periphery.

It has alternate brushed and mirror polished surfaces, giving the watch contrast and precise edges. The top and sides of the shell are Satin sanded and separated by a widened polished bevel to accentuate the shape of the shell. Like br03-92 diver, the crown guard plate of BR 05 is fixed by screws. For sports watches, the combination of bracelet and case is very important. The surface of the case echoes on the bracelet, with flat drawstring links and polished center links.

The manufacturing process of the watch chain is as good as that of the case, but the design of the watch chain is similar to that of Genta. Another element that makes the br 05 A B & R watch is the meaningless dial, with the trademark large Arabic numerals in a quarter. And baton indicators. For greater functionality, numbers, indexes, and pointers are full of super luminova.

Although the best replica watches review dial is from the earlier br model, the pointer of the baton deviates from the normal state. I prefer different shapes of pointers.br 05 dials are available in blue, grey or black, have a simple sun finish, and have no unnecessary frills to make the overall design a priority. The blue and gray dials don't move for minutes, which makes their function a little bit less. In contrast, the black dial has obvious personality and industrial sense, with its own personality and feeling. The three o'clock date display blends perfectly with the dial design, while the date wheel uses a matching color - in many cases. Its kind is not shared. It also has a thick frame that matches the weight of a quarter hour number. Although the br 05 uses the same main sellita sw300 as most of the B & R watches (itself derived from ETA 2892), it is more customized than before. The movement is called br-cal.321, which has uniform granular grinding and full rotor with opening.

The rotor design is ingenious: make sure that the rotor is completely unbalanced - that there is enough weight on one side to wind the spring - is framed asymmetrically, with half the mass left.

The Richard Mille RM 11-04 Automatic Flyback Chronograph Roberto Mancini alternative wire drawing and polishing treatment of the case of the watch continue to the watch chain, which has smooth wire drawing link and polished intermediate link. But the strap doesn't have a smooth, sloping edge like the case, which would have been nice, but the price may not be possible. While the other versions of BR 05 have robust dials, the br 05 skeleton does not dial itself. Instead, it has a skeleton motherboard on which the baton hour mark is applied. The main board is made of wide and inclined flange ring, which highlights the depth of the dial. The main board is framed in a geometric way, with smooth lines and soft angles, which complement the overall design of the case and the bezel. From the front, you can see most of the gear trains, including the swing wheel and the spring in the hollow spring box.

Like most B & R watches, the case is made by G & F chatelain, Chanel's watchmaker and the parent company of B & R. The same company is responsible for the case and buckle of MB & F and Richard Mille. Therefore, the construction and finishing of the case are excellent, especially in terms of price. It has alternate wire drawing and mirror polished surfaces, making the watch sharper and sharper. The satin polished top and sides of the shell are separated by wide polished bevels, thus enhancing the geometry of the shell. https://www.highluxurystore.com